Get Support

You can download Windows Application From Here

Click the ‘Start’ or ‘Windows’ button in the lower-left hand corner of your screen, then navigate your mouse to the ‘Control Panel’ item and click.

Locate the ‘View network status and tasks’ item under the ‘Network and Internet’ category, mouse over the heading, and click.

Point the mouse cursor on the ‘Setup a connection or network’ item, third down from the top in the ‘Tasks’ sidebar on the left, and click to continue.

With your mouse, select the fourth item in the list, labeled ‘Connect to a workplace’ – click the ‘Next’ button on the lower-right corner of the panel, and move on to the next step.

*NOTE* – This menu may appear if you have previously configured any other workplace or VPN connections in the ‘Network and Sharing
Center’. If you do not see this panel, please move on to the next step. Otherwise, select the radio button labeled ‘No, create a new connection’, and continue forward with the ‘Next’ button as before.

Mouse over the first item on this panel, labeled ‘Use my Internet connection (VPN)’, and click.
For the ‘Internet address’ field, fill in the VPNKeys hostname you’ve selected from our list of available hosts in here. For the ‘Destination name’ field, you may enter whatever you wish – this is a descriptor of the connection. Of the three unticked options below, only the last needs to be activated – check the box labeled ‘Don’t connect now, just set it up so I can connect later’. Move to the next step after clicking the ‘Next’ button.

Confirm your username and password from the confirmation email sent to you at sign-up, and enter both in the corresponding fields on this form – please keep in mind that our authentication system is case-sensitive, and even a single miscapitalized letter will prevent you from logging in. If you’d like to save your password, check the second checkbox below, labeled ‘Remember this password’. Do not fill the ‘Domain’ field. Click the ‘Create’ button in the lower-right corner to continue.

More configuration is necessary, so connecting now would potentially error out – you will need to mouse over to the ‘Close’ button on the lower-right corner of the panel and click to continue.

Back in the ‘Network and Sharing Center’, look for the link fourth down from the top in the ‘Tasks’ sidebar on the left side of the panel – the link is labeled, ‘Manage adapter connections’. Click this link to continue.

If the name of your connection differs from our example, keep that in mind when selecting the connection. Look for the connection you made earlier, right click on the icon, mouse down to the ‘Properties’ item, and click your mouse to continue.

Confirm the hostname from the VPNKeys server list, and continue on to the ‘Security’ tab by clicking on corresponding tab indicator at the top of the panel.

Under the ‘Security options’ frame, select the ‘Advanced (custom settings)’ radio button – click the ‘Settings…’ button directly to the right to continue.

Click the drop-down box labeled ‘Data encryption:’, and mouse or arrow-key down to the ‘Require encryption (disconnect if server declines)’ item. Confirm the ‘Allow these protocols’ radio button is selected after making the previous change, and confirm that only the ‘CHAP’, and ‘MS-CHAP v2’ items are ticked in the list below. Please examine the screenshot as a reference. Click the ‘OK’ button to continue.

Following your confirmation of the previous panel, the dialog shown should display – click the ‘Yes’ button to continue.

Continue forward to the ‘Networking’ tab by clicking the tab of the same name near the top of the panel. Click the drop-down box labeled ‘Type of VPN’, and mouse or arrow-key down to the ‘Point to Point Tunneling Protocol (PPTP)’ selection. The dialog shown in step 15 *MAY* display again after making your selection – just click the ‘Yes’ button as before, and move on to the next step.

In the center frame on this panel, uncheck the ‘TCP/IPv6’ and ‘File and Printer Sharing for Microsoft Networks’ items, as shown in the example. Confirm your settings, and move on to the next step. Commit your settings by clicking the ‘OK’ button near the bottom-right corner to continue.

To test your settings and login credentials, point your cursor to the ‘Notification Area’, usually located near the lower-right hand corner of your screen. In this area, look for an icon of network with a globe overlay (see the example), and click it. Click the link labeled ‘Connect to a network’ to continue.

Confirm the VPN connection name made earlier, select it with a single click – then locate the ‘Connect’ button in the lower-right corner. Click the ‘Connect’ button to start the secure tunnel.

Confirm your username for accuracy, then click the ‘Connect’ button in the bottom-left corner of this panel. After 30 seconds or so, confirm the connectivity status by opening the ‘Notification Area’ popup in your taskbar – you will be notified of any problems with the connection, in which case you will want to contact our support team. Once you have verified connectivity to the VPN, you can now have peace of mind th

at your online activities are secured from prying eyes.